Using CONFIG: Commodore 64¶

CONFIG on the Commodore 64 is a native C64 application displayed using PETSCII character set and standard C64 color palette.

Launching CONFIG¶

LOAD"CONFIG",8,1
RUN

Or if FujiNet is configured to auto-boot: - Power on the C64 — FujiNet presents the CONFIG disk as device 8 and it loads automatically.

Keyboard reference¶

Key	Action
Cursor keys	Navigate menus
`Return`	Select / confirm
`Run/Stop`	Go back / cancel
`Del`	Delete character
`F1` / `F3`	Page up/down in file lists

.------------------------------------.
|        FUJINET CONFIG              |
|                                    |
|  1  HOSTS & DEVICES                |
|  2  NETWORK                        |
|  3  PRINTER                        |
|  4  CLOCK                          |
|  5  SYSTEM INFO                    |
|  6  REBOOT                         |
|                                    |
|  FW: 1.5  IP: 192.168.1.42        |
'------------------------------------'

Screen 1: Hosts & Devices¶

Supported image formats:

Extension	Description
`.D64`	1541 single-sided double-density
`.D71`	1571 double-sided double-density
`.D81`	1581 double-sided high-density
`.T64`	Tape image

Device slots:

Device	Description
8	Primary disk device (default)
9	Secondary disk device
10	Tertiary disk device

Avoid conflict with real drives

If you have a real 1541 drive on device 8, change FujiNet's device number in Network settings to 9 or 10.

Screen 2: Network¶

Configure Wi-Fi and view FujiNet's IP address.

Screen 3: Printer¶

Setting	Options
Emulation	MPS-803, 1525, Epson MX-80, generic
Output	PDF on SD, PDF server

Popular TNFS servers for Commodore¶

Server	Contents
`tnfs.fujinet.online`	Official community server
`c64.irata.online`	Commodore 64 software archive